How do I connect my VX520 terminal to a phone line to use a dial-up connection?

How do I connect my VX520 terminal to a phone line to use a dial-up connection?

Accessing the connection ports

  1. Turn the VX520 upside-down.
  2. Remove the rear cover as shown to view the connection ports.

Removing the rear cover from the VX520 device. Removing the VX520's rear cover

Connecting the phone cord to the terminal

Note: If you want to use a dial-up connection for your terminal, you must connect to a dedicated analog phone line. Digital and VOIP lines do not support this connection method.
  1. Connect one end of the phone cord to the telephone port on the terminal.
  2. Connect the other end to your telephone jack.

A phone cord connecting to the Ethernet port of the VX520.Connecting a phone cord to the VX520

Powering the terminal

  1. Connect the round end of the power cord into the power port on the bottom of the terminal.
  2. Plug the adapter into a power socket.

The power cord connecting to the power port on the VX520.Connecting the power cord to the VX520

Tidying the cords

  1. Run all cords in the terminal over the back of the device.
  2. Attach the rear cover.

Modified on: Thu, 21 Feb, 2019 at 9:25 AM