How do I connect my VX520 terminal to an Ethernet network?

How do I connect my VX520 terminal to an Ethernet network?

Accessing the connection ports

  1. Turn the VX520 upside-down
  2. Remove the rear cover as shown to view the connection ports.

Removing the rear cover from the VX520 device. Removing the VX520's rear cover

Connecting the Ethernet cable to the terminal

  1. Connect one end of the Ethernet cable to the ETH port on the terminal.
  2. Connect the other end to an available port on your router or switch.

An Ethernet cable connecting to the Ethernet port of the VX520 device.Connecting an Ethernet cable to the VX520

Powering the terminal

  1. Connect the round end of the power cord into the power port on the bottom of the terminal.
  2. Plug the adapter into a power socket

The power cord connecting to the power port on the VX520.Connecting the power cord to the VX520

Tidying the cords

  1. Run all cords in the terminal over the back of the device.
  2. Attach the rear cover.

Modified on: Thu, 21 Feb, 2019 at 9:22 AM