How do I change the fraud control settings on my iCT220/250 terminal?

How do I change the fraud control settings on my iCT220/250 terminal?

You can configure the iCT220/250 terminal's fraud control settings to require that the:

  • Customer's card is verified
  • Last four digits of the card must be entered
  • Both the customer's card is verified and the last four digits of the card must be entered

To change the fraud control settings:

Step 1. To return to the home screen, press Clear (red button). 

Step 2. Press .;#* (punctuation key).

Step 3. Type the admin password, then press Enter (green button). The default password is 1234567F.

Step 4. Press 3 (Setup Menu), then press (Trans Options).

Step 5. Press (Credit), then press 2 (Fraud).

Step 6. Select the required fraud control settings:

  • To turn off fraud control, press 1 (Off). 
  • To use "verify card fraud control", press 2 (Verify Card#).
  • To use "entering the last four card digits", press 3 (Enter Last 4).
  • To use "verify card fraud control and entering the last four card digits", press (Both).

Modified on: Wed, 27 Feb, 2019 at 4:15 AM